Contents
Mitsubishi Electric, Fujitsu, Samsung, Daikin and MRE: which air con parts wear out first?
Every brand builds strong air cons, but no system lasts forever. Heat, dust, long run times and daily use slowly wear down the small parts inside the unit. Even the most reliable brands have weak points. We’ll look at which air con parts fail first across the major names in Australia. It helps you understand where problems start and why summer brings out the worst of these faults.
The behaviour of each brand is slightly different, but the early warning signs stay the same. Weak airflow, strange cooling cycles, loud noise and slow response usually point to worn air con parts. Below is a simple breakdown of what fails first across the main brands.
Mitsubishi Electric parts that wear out first
Mitsubishi Electric is known for quiet operation and long life. Still, some Mitsubishi Electric parts weaken earlier than others. The most common early failures involve:
• air con remote control
• air con filters
• vanes
• thermistors
• indoor fan blades
Filters clog fast during summer. Dust and fine debris build up and make the unit work harder. When filters block up, airflow drops and the system becomes noisy or slow. These air con parts are cheap and easy to replace, but they cause big trouble when ignored.
Another weak point is the thermistor. This small sensor controls temperature and cooling cycles. When it becomes worn, the air con switches off too early or keeps running without reaching the right temperature. Out of all the Mitsubishi Electric parts, the thermistor is the one that causes the most odd behaviour when it fails.
Mitsubishi fan blades can also split with age. Once the fan becomes unstable, the entire unit vibrates and loses airflow. These air con parts need quick replacement to protect the motor.
By far the top failures for Mitsubishi Electric parts are filters, thermistors and fan blades.
Fujitsu air conditioner parts that wear out first
Fujitsu is popular across Australia because their systems cool well and run quietly. But some Fujitsu air conditioner parts weaken earlier than expected. The main parts that fail first include:
• filters
• remotes
• wall controllers
• fan blades
• capacitors
• thermistors
The filters clog quickly in humid weather. Heavy dust, pet hair and fine debris restrict airflow, which makes the system feel weak. Of all Fujitsu air conditioner parts, the filter is the first to struggle each summer.
Fan blades in Fujitsu systems can warp when the unit runs day and night. A warped blade makes the airflow uneven and noisy. Thermistors also wear down and cause temperature issues.
Capacitors are another weak point. They help the fan motor start. When capacitors begin to fail, the fan becomes slow, stops at random or hums loudly. Out of all Fujitsu air conditioner parts, capacitors fail more often than people expect.
Daikin air conditioner parts that wear out first
Daikin is known for strong cooling, even in extreme heat. But Daikin air conditioner parts still face wear over time. The parts most likely to fail first include:
• sensors
• filters
• remote controls
• PCBs
• fan motors
Sensors and thermistors in Daikin systems often struggle after years of heavy use. These small air con parts deal with temperature regulation. When they lose accuracy, the air con cycles on and off at the wrong time. This is one of the most common early faults in Daikin air conditioner parts.
Filters clog slowly but heavily. Daikin filters tend to hold onto dust until performance drops suddenly.
PCBs in older Daikin models can also fail due to heat and age. These internal boards control most functions. Once they weaken, the unit starts to ignore commands or behave unpredictably.
Fan motors are another common issue. They run for long hours during summer. Once worn, airflow becomes low and uneven. Across all Daikin air conditioner parts, fan motors and sensors cause the most early problems.
Samsung air conditioner parts that wear out first
Samsung systems are common in apartments and newer builds. Their cooling is strong, but several Samsung air conditioner parts can fail sooner than expected. These include:
• remote controls
• filters
• vanes
• thermistors
• internal control boards
Remotes are one of the most replaced Samsung air conditioner parts. The battery latch breaks easily, and the buttons can stop responding. Filters clog quickly too, especially in humid suburbs around Sydney.
Vanes are another weak point. When the vanes stop opening, airflow becomes weak and uneven. Thermistors in Samsung systems also show early signs of wear after long periods of heat.
Control boards may also become unstable with age. When these air con parts weaken, the unit may ignore commands or turn on and off at strange times.
Across all Samsung air conditioner parts, filters and thermistors fail the most in summer.
MRE air conditioner parts that wear out first
MRE systems, also known as Mitsubishi Heavy Industries, are well built and long lasting. Still, certain MRE air conditioner parts fail more often than others. The main early failures are:
• filters
• fan blades
• remotes
• thermistors
• drain pumps
Filters block quickly when used daily. A blocked filter makes airflow weak and pushes the system harder. This is one of the most common early faults in MRE air conditioner parts.
Fan blades in MRE units can split with age. A worn blade causes vibration, weak airflow and noise. Thermistors also show wear earlier in older models.
Drain pumps are another known weak point. They handle moisture, and in humid weather they sometimes fail or block, leading to leaks. Out of all MRE air conditioner parts, drain pumps and filters are the most commonly replaced.
The most common early failures across all brands
Even though each brand is different, the same air con parts tend to fail first across almost every system:
• filters
• thermistors
• fan blades
• remotes
• sensors
These air con parts work daily and get the most wear. Once they weaken, the entire unit feels different. Cooling slows, airflow drops and modes stop responding. Most early faults come from these air con parts becoming old, dusty or unstable.
Why air con parts wear faster in summer
Summer makes every air con work much harder. Heat forces the cooling cycle to run longer. Dust rises from carpets and sticks to filters. Parts warm up fast and cool down slowly. These conditions make weak air con parts fail faster.
When a filter blocks up, the airflow drops and the system works harder. When a thermistor becomes inaccurate, the cooling cycle becomes confused. When a fan blade weakens, the airflow becomes uneven.
All these air con parts influence each other. Failure in one part puts pressure on the next.
What to do when your air con struggles
If your system becomes noisy, slow or weak, chances are one of the air con parts listed above is reaching the end of its life. Replacing the worn part often brings the whole system back to full strength.
Regular cleaning, simple checks and early replacement of worn air con parts can prevent breakdowns during peak heat.
Reach out if you need help changing the filter or with any other appliance repair. You can also check our customer reviews for appliance repairs on Google.